Radwag PUE C41H Indicator Instrukcja Użytkownika Pobierz pdf (Strona 155)

32.2.3. Setting Ethernet parameters

On order to establish the connection with EDYTOR WPW through

Ethernet interface follow the remarks below:

• Power up the scale and run the EDYTOR WPW program,

• Connect the scale to a computer/switch using a PT0017 or PT0014

cable (depending on the Ethernet module on board – see ch. 27.1.2),

• Set the port for communication with a computer – parameter

<P3.1.1 COMP. PORT> set to Ethernet (see ch. 15.1.1),

• Set parameters from the <P2.4 ETHERNET> group (see ch. 14.2):

− Parameter <P2.4.1 WORK MODE> should be set to SERVER,

− Parameters <P2.4.2 IP ADDRESS>, <P2.4.3 SUBNET MASK>,

<P2.4.4 GATEWAY> should be set according to the network

supervisor directions,

− <P2.4.5 LOCAL PORT> set the same as in the computer

program (in networks some ports can be taken),

− Parameter <P2.4.8 TIMEOUT> set to 0 in order to prevent

breaking connection.

• Press the „Settings” button:

- 155 -

1 2 ... 150 151 152 153 154 155 156 157 158 159 160 161 162 163

Brak uwag

Radwag PUE C41H Indicator Instrukcja Użytkownika Strona 155