Radwag MA 200.3Y Moisture Analyzer Instrukcja Użytkownika Pobierz pdf (Strona 113)

- 113 -

20. COMMUNICATION

Menu Communication is located in a menu group Parameters. It is accessed by

pressing < Setup > quick access key and entering submenu <

Communication>.

The moisture analyzer enables communicating with peripheral devices through

the following ports:

• COM 1 (RS232),

• COM 2 (RS232),

• Ethernet,

• Wifi,

• Tcp.

The ports are configured in group of parameters < Communication>.

20.1. RS 232 port settings

Procedure:

− Select communication port < COM1> or < COM2>,

− Set appropriate values

The RS 232 ports enable the following setting of transmission parameters:

• Baud rate - 4800, 9600, 19200, 38400, 57600, 115200 bit/s

• Data bits - 5, 6, 7, 8

• Stop bits - None, 1, 1.5, 2

• Parity - None, Odd, Even, Marker, Interval

20.2. ETHERNET port settings

Procedure:

− Select communication port < Ethernet> and set appropriate values:

• DHCP - Yes – No

• IP Address - 192.168.0.2

• Subnet mask - 255.255.255.0

• Default gate - 192.168.0.1

Caution:

Above settings are for information purpose only. Transmission parameters should be

selected in accordance with the settings of client’s local network.

To carry out changes in the settings, press key which displays a message:

<to make changes effective, restart the moisture analyzer>,

1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 169 170

Brak uwag

Radwag MA 200.3Y Moisture Analyzer Instrukcja Użytkownika Strona 113